Hello,

I have a remote command One For All Evolve 4 (URC-7145) / One For All Evolve 4 URC 7145. I use the STB mode "Set Top Box, Satellite Receiver, Cable Converter,Freeview, DVB-T, IPTV, Media, Streamer" configured for a Panasonic device.

I've used "ir-keytable" to build my configuration and write a file for "lirc", "/etc/lirc/lircd.conf.d/urc7145_stb_panasonic.lircd.conf" joined and renamed "*.txt". As I have 3 tuners "USB RTL2832 with tuner R820T2" with a IR receiver. As "root", I've set a crontab "@reboot /usr/bin/sleep 15; /usr/bin/ir-keytable -c -p rc-6" to initialize the first USB DVB-T receiver. I give you my "/etc/vdr/remote.conf" renamed "*.txt". With "vdr-sxfe" under Linux, Debian Bookworm ("stable" 09/2024) the remote works.

Now I try to set the remote for Kodi, I've used HOW-TO:Set up an MCE remote control in Linux. I've set my file "/home/<login>/.kodi/userdata/Lircmap.xml", the file is joined renamed "*.txt". I've added the configuration of my URC-7145 remote to this file. As there is no "Subtitles" button, I use the "Power" button to have the subtitles.

With Kodi and my remote, my problem is I can't select, validate, etc. a choice or exit. The arrows and all other buttons are working but impossible to select something or exit. When I use the TV menu with VDR, if a dialog box give the choice between the direct or replay, I can't make a selection nor quit this dialog box, no "exit" possible. With the keyboard, I can use the "TAB", "ESC" and "RETURN" keys, but with my remote I have no buttons to replace the keyboard actions.

Could you help me to finalize my configuration ?

Thank you in advance for your help.

Lyx

Sorry, a mistake during the edition ...

Hello,

The output of irw :

Zitat

Zitat 0004000400000083 00 KEY_EXIT urc7145_stb_panasonic
000400040000005c 00 KEY_ENTER urc7145_stb_panasoni

I have no troubles with VDR and "vdr-sxfe", so "/etc/vdr/remote.conf" is good. My problem is only with "kodi", where the "KEY_EXIT" or "KEY_EXIT" are ignored. Impossible to select/valid something or to escape from dialog box or a menu.

The problem is the usage of the remote with "kodi". I would select with the "KEY_ENTER" and go bback, exit with "KEY_EXIT'.

Thank you to see that !

I've removed the <altname>/dev/input/event19</altname> and add the <back>KEY_EXIT</back>. Now I have the "exit" valid, but the "enter"/"select" is always missing.

Solved

<back>KEY_EXIT</back> added.

With your help, I've found that the problem is not many KEY_ENTER, but <enter>Enter</enter> and tt]<enter>Enter</enter>[/tt] for my remote. I could investigate later.

As I've modified an existing configuration, the error could be here. For example, the <remote device="mceusb"> has

Zitat

<select>OK</select>

<select>KEY_OK</select>

<enter>KEY_ENTER</enter>

Thank you again for the help