[GELÖST] MSI TV@nywhere Satellite Pro - treiber ?

r_schnappi · 8. Juli 2009

Habe mir eben diese Karte gekauft da ich mit ihr den PC über die FB einschalten kann.

Code

01:07.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 8811
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Bild 1: http://media.msi.eu/main.php?g2_itemId=24909&g2_imageViewsIndex=1
Bild 2: http://media.msi.eu/main.php?g2_itemId=24912&g2_imageViewsIndex=1

leider finde ich keine treiber für diese karte

habe easyvdr 0.607 sheep image
die lipliandvb habe ich schon aktualisiert
mittlels modprobe habe ich schon alle card ids durchgetestet

Code

modprobe saa7134 card=13

Code

[  113.009289] saa7134 ALSA driver for DMA sound unloaded
[  266.209303] saa7130/34: v4l2 driver version 0.2.15 loaded
[  266.209605] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xed000000
[  266.209625] saa7134[0]: subsystem: 1462:8811, board: UNKNOWN/GENERIC [card=0,autodetected]
[  266.211125] saa7134[0]: board init: gpio is 100
[  266.424765] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  266.424789] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[  266.424803] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[  266.424818] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424831] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[  266.424844] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424858] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424871] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424884] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424897] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424910] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424923] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424937] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424950] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424963] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.424976] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  266.441235] saa7134[0]: registered device video2 [v4l2]
[  266.441465] saa7134[0]: registered device vbi1
[  266.503979] saa7134 ALSA driver for DMA sound loaded
[  266.504230] saa7134[0]/alsa: saa7134[0] at 0xed000000 irq 17 registered as card -1
[  280.905112] saa7134 ALSA driver for DMA sound unloaded
[  594.297333] saa7130/34: v4l2 driver version 0.2.15 loaded
[  594.297471] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xed000000
[  594.297482] saa7134[0]: subsystem: 1462:8811, board: Typhoon TV+Radio 90031 [card=13,insmod option]
[  594.298579] saa7134[0]: board init: gpio is 100
[  594.503043] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  594.503067] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[  594.503081] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[  594.503095] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503108] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[  594.503122] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503140] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503153] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503166] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503180] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503193] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503206] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503219] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503232] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503245] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.503258] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  594.617807] saa7134[0]: registered device video2 [v4l2]
[  594.617886] saa7134[0]: registered device vbi1
[  594.617961] saa7134[0]: registered device radio0
[  594.721862] saa7134 ALSA driver for DMA sound loaded
[  594.722000] saa7134[0]/alsa: saa7134[0] at 0xed000000 irq 17 registered as card -1
[  606.191588] saa7134 ALSA driver for DMA sound unloaded
[ 1698.670965] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 1698.671160] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xed000000
[ 1698.671166] saa7134[0]: subsystem: 1462:8811, board: LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [card=55,insmod option]
[ 1698.671256] saa7134[0]: board init: gpio is 100
[ 1698.671338] input: saa7134 IR (LifeView FlyDVB-T D as /class/input/input6
[ 1698.843019] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 1698.843029] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 1698.843037] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[ 1698.843045] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843052] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[ 1698.843060] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843067] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843074] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843081] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843089] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843096] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843103] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843111] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843118] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843125] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.843133] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1698.859252] saa7134[0]: registered device video2 [v4l2]
[ 1698.859296] saa7134[0]: registered device vbi1
[ 1698.859337] saa7134[0]: registered device radio0
[ 1698.873797] dvb_init() allocating 1 frontend
[ 1698.888799] DVB: Unable to find symbol tda10046_attach()
[ 1698.908434] saa7134 ALSA driver for DMA sound loaded
[ 1698.908470] saa7134[0]/alsa: saa7134[0] at 0xed000000 irq 17 registered as card -1

Alles anzeigen

Code

10: PCI 107.0: 11200 TV Card
  [Created at pci.281]
  Unique ID: 2_DJ.cZjSSo5ZA4B
  Parent ID: 8otl.Ao4TF0pWC38
  SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:01:07.0
  SysFS BusID: 0000:01:07.0
  Hardware Class: tv card
  Model: "Micro-Star International SAA7134 Video Broadcast Decoder"
  Vendor: pci 0x1131 "Philips Semiconductors"
  Device: pci 0x7134 "SAA7134 Video Broadcast Decoder"
  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
  SubDevice: pci 0x8811
  Revision: 0x01
  Driver: "saa7134"
  Driver Modules: "saa7134"
  Memory Range: 0xed000000-0xed0003ff (rw,non-prefetchable)
  IRQ: 17 (no events)
  Module Alias: "pci:v00001131d00007134sv00001462sd00008811bc04sc80i00"
  Driver Info #0:
    Driver Status: saa7134 is active
    Driver Activation Cmd: "modprobe saa7134"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #24 (PCI bridge)

Alles anzeigen

so wie es aussieht erkennt er den analogen eingang der karte aber nicht den dvb eingang

woher kann ich treiber für diese karte bekommen ??

danke und lg roli

3PO · 8. Juli 2009

Hier gibt es ein Script zum erkennen der DVB-Hardware. Evtl. kannt es ja mal bei Dir laufen lassen und die Ausgabe dann hier posten.

r_schnappi · 8. Juli 2009

hier ist der inhalt (die Nova ersten 3 einträge funktioniert!, der letzte eintrag ist die MSI) :

Code

01:06.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 6906
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2


Class:     0x040000
Vendor:    0x14f1
Device:    0x8800
SubVendor: 0x0070
SubDevice: 0x6906




01:06.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 6906
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2


Class:     0x048000
Vendor:    0x14f1
Device:    0x8811
SubVendor: 0x0070
SubDevice: 0x6906




01:06.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 6906
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at eb000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2


Class:     0x048000
Vendor:    0x14f1
Device:    0x8802
SubVendor: 0x0070
SubDevice: 0x6906




01:06.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 6906
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2


Class:     0x048000
Vendor:    0x14f1
Device:    0x8804
SubVendor: 0x0070
SubDevice: 0x6906




01:07.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 8811
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at ed000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1


Class:     0x048000
Vendor:    0x1131
Device:    0x7134
SubVendor: 0x1462
SubDevice: 0x8811

Alles anzeigen

lg

3PO · 8. Juli 2009

Laut der Augabe "Device: 0x7134" handelt es sich um einen "SAA 7134"

Teste mal :

Code

modprobe saa7134
modprobe saa7134-dvb

r_schnappi · 8. Juli 2009

funktioniert leider nicht,
laut chip auf der karte habe ich noch den tda10086 geladen,
es wird nur der analoge eingang erkannt !

habe auch schon alle card-idis von 0 - 152 durchprobiert
modprobe saa7134 card=xx

Code

[ 5990.075170] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 5990.075302] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xed000000
[ 5990.075315] saa7134[0]: subsystem: 1462:8811, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 5990.075755] saa7134[0]: board init: gpio is 100
[ 5990.228023] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 5990.228042] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 5990.228056] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[ 5990.228069] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228083] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[ 5990.228096] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228109] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228122] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228135] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228148] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228161] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228175] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228188] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228201] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228214] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228227] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5990.228639] saa7134[0]: registered device video2 [v4l2]
[ 5990.228713] saa7134[0]: registered device vbi1
[ 5990.266328] saa7134 ALSA driver for DMA sound loaded
[ 5990.266464] saa7134[0]/alsa: saa7134[0] at 0xed000000 irq 17 registered as card -1

Alles anzeigen

3PO · 8. Juli 2009

Laut Deinem Log...

Code

....
Jul  8 19:06:31 (none) kernel: [  116.025607] saa7134[0]/dvb: dvb_init: No lnbp21 found!
....

... wird das Modul für den lnbp21 nicht gefunden, mach mal:

Code

modprobe lnbp21

r_schnappi · 8. Juli 2009

es müste ein tba10086 modul sein laut chip?

leider nein ... module sind geladen

Code

lnbp21                  3200  0
i2c_core               25108  18 saa7134_dvb,saa7134,lnbp21,tda10086,tda826x,nvidia,cx8800,isl6421,cx24116,cx88_vp3054_i2c,tuner,cx88xx,i2c_algo_bit,v4l2_common,tveeprom,eeprom,i2c_viapro,i2c_nforce2
saa7134_alsa           12576  0
saa7134_dvb            23436  0
saa7134               153548  2 saa7134_alsa,saa7134_dvb
videobuf_dvb            7812  2 saa7134_dvb,cx88_dvb
ir_common              53380  2 saa7134,cx88xx
v4l2_common            17024  5 saa7134,cx2341x,cx8800,tuner,cx88xx
tveeprom               13060  2 saa7134,cx88xx
videobuf_dma_sg        13060  8 saa7134_alsa,saa7134_dvb,saa7134,cx8800,cx88_alsa,cx88_dvb,cx8802,cx88xx
videobuf_core          18436  6 saa7134,cx8800,videobuf_dvb,cx8802,cx88xx,videobuf_dma_sg
snd_pcm                73988  5 saa7134_alsa,cx88_alsa,snd_hda_intel,snd_pcm_oss
snd                    54052  13 saa7134_alsa,cx88_alsa,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
videodev               38560  6 saa7134,cx8800,tuner,cx88xx,v4l2_common,gspca_main
i2c_core               25108  18 saa7134_dvb,saa7134,lnbp21,tda10086,tda826x,nvidia,cx8800,isl6421,cx24116,cx88_vp3054_i2c,tuner,cx88xx,i2c_algo_bit,v4l2_common,tveeprom,eeprom,i2c_viapro,i2c_nforce2
tda10086               10372  0
i2c_core               25108  18 saa7134_dvb,saa7134,lnbp21,tda10086,tda826x,nvidia,cx8800,isl6421,cx24116,cx88_vp3054_i2c,tuner,cx88xx,i2c_algo_bit,v4l2_common,tveeprom,eeprom,i2c_viapro,i2c_nforce2

Alles anzeigen

und dmesg log:

Code

[ 7723.899503] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 7723.899571] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xed000000
[ 7723.899577] saa7134[0]: subsystem: 1462:8811, board: NXP Snake DVB-S reference design [card=133,insmod option]
[ 7723.899673] saa7134[0]: board init: gpio is 100
[ 7724.046019] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 7724.046027] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 7724.046034] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[ 7724.046041] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046048] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[ 7724.046055] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046061] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046068] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046074] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046081] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046087] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046094] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046100] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046107] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046113] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046120] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7724.046334] saa7134[0]: registered device video2 [v4l2]
[ 7724.046371] saa7134[0]: registered device vbi1
[ 7724.063964] dvb_init() allocating 1 frontend
[ 7724.079303] saa7134[0]/dvb: dvb_init: No lnbp21 found!
[ 7724.101056] saa7134 ALSA driver for DMA sound loaded
[ 7724.101088] saa7134[0]/alsa: saa7134[0] at 0xed000000 irq 17 registered as card -1

Alles anzeigen

das sind jetzt alle card id's mit MSI funktionieren aber leider auch nicht!

Code

0 -> UNKNOWN/GENERIC
 55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [5168:0306,4E42:0306]
 82 -> MSI TV@Anywhere plus                     [1462:6231,1462:8624]
 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,5168:3307,4e42:3502]
135 -> MSI TV@nywhere A/D v1.1                  [1462:8625]

r_schnappi · 16. Juli 2009

Habe die karte unter win7 bzw vista 64 bit getestet und Sie funktioniert
U.u. kann jemand etwas mit dem inf File von Windows anfangen

danke

r_schnappi · 30. Juli 2009

Habe es gelöst und die Treiber vom Repo so modifiziert dass es fuktioniert Hier die lösung:

In die saa7134.h: zeile ca. 296 kommt:

Code

#define SAA7134_BOARD_MSI_TVATANYWHERE_SATELLITE_PRO  169

In die saa7134-cards.c: zeile ca. 5120 kommt:

Code

[SAA7134_BOARD_MSI_TVATANYWHERE_SATELLITE_PRO] = {
		.name           = "MSI TV@nywhere Satellite Pro",
		.audio_clock    = 0x00200000,
		.tuner_type     = TUNER_ABSENT,
		.radio_type     = UNSET,
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.mpeg           = SAA7134_MPEG_DVB,
		.inputs = {{
			.name   = name_comp1,
			.vmux   = 3,
			.amux   = LINE1,
		}, {
			.name   = name_svideo,
			.vmux   = 8,
			.amux   = LINE1,
		} },
	},

Alles anzeigen

und in Zeile ca. 8728

Code

.vendor       = PCI_VENDOR_ID_PHILIPS,
		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
		.subvendor    = 0x1462,
		.subdevice    = 0x8811,
		.driver_data  = SAA7134_BOARD_MSI_TVATANYWHERE_SATELLITE_PRO,
	}, {

und zum schluss komt noch in die saa7134-dvb.c: zeile ca. 1194

Code

case SAA7134_BOARD_MSI_TVATANYWHERE_SATELLITE_PRO:
		wprintk("MSI TV@nywhere Satellite Pro by roli\n");
			fe0->dvb.frontend = dvb_attach(tda10086_attach,
						&flydvbs, &dev->i2c_adap);
			if (fe0->dvb.frontend) {
				if (dvb_attach(tda826x_attach,
						fe0->dvb.frontend, 0x60,
						&dev->i2c_adap, 0) == NULL) {
					wprintk("%s: MSI TV@nywhere Satellite Pro, no "
						"tda826x found!\n", __func__);
					goto dettach_frontend;
				}
			}
		break;

Alles anzeigen

danach:
- VDR stoppen
- ein make && make install && ldconfig
- tda10086 von der Blacklist in /etc/modprobe.d/easyVDR mit # auskomentieren
- VDR rebooten / oder starten sollte reichen
- Primär DVB ins den VDR Settings anpassen!
ausgabe von dmesg:

Code

[  720.810970] saa7130/34: v4l2 driver version 0.2.15 loaded
[  720.811141] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xfafff000
[  720.811147] saa7134[0]: subsystem: 1462:8811, board: MSI TV@nywhere Satellite Pro [card=169,autodetected]
[  720.811193] saa7134[0]: board init: gpio is 100
[  720.950017] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  720.950025] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[  720.950032] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[  720.950038] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950044] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[  720.950050] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950056] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950062] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950068] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950074] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950080] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950086] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950092] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950098] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950104] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950110] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  720.950319] saa7134[0]: registered device video1 [v4l2]
[  720.950353] saa7134[0]: registered device vbi1
[  720.959059] saa7134 ALSA driver for DMA sound loaded
[  720.959090] saa7134[0]/alsa: saa7134[0] at 0xfafff000 irq 17 registered as card -1
[  720.964657] dvb_init() allocating 1 frontend
[  720.964662] saa7134[0]/dvb: MSI TV@nywhere Satellite Pro by roli
[  721.020017] DVB: registering new adapter (saa7134[0])
[  721.020022] DVB: registering adapter 1 frontend 0 (Philips TDA10086 DVB-S)...

Alles anzeigen

das mit dem IR Reciver muß ich mir noch einmal ansehen da ich noch probleme mit dem IR anschluß habe

lg roland

3PO · 30. Juli 2009

Schön, dass Du eine Lösung gefunden hast, leider aber sehe ich nicht, was und wo genau Du modifiziert hast.

Könntest Du mal bitte ein diff machen und dann hier posten?

Denn ich denke mal das sicherlich auf für andere User interessant, die eine solche Karte besitzen.

r_schnappi · 30. Juli 2009

Hoffe das diff passt so??
[Blockierte Grafik: http://img5.imagebanana.com/img/revnmk2m/thumb/msi.jpg]
[Blockierte Grafik: http://img5.imagebanana.com/img/maoj7xk0/thumb/nova.jpg]

So nun sollte auch der IR anschluß funktionieren!!

lg

dsiggi · 5. August 2009

Hi,
wie wende ich das diff den auf die Kernel-Source an?

dsiggi

r_schnappi · 6. August 2009

Zitat

Original von dsiggi
Hi,
wie wende ich das diff den auf die Kernel-Source an?

dsiggi

nein, du machst ein
- "hg clone http://linuxtv.org/hg/v4l-dvb/"
dann hast du die DVB Treiber auf deinem Rechner,
- wechselst in das verz. v4l-dvb
danach speicherst du das diff File auf deinem rechner und
- "patch -p1 < /path/to/diff"
nun kannst du ganz normal ein
- "make && make install && ldconfig"
machen vorher VDR stoppen

habe auch noch ein diff für die s2-liplianin (hg clone http://mercurial.intuxication.org/hg/s2-liplianin) angehängt

roli

dsiggi · 6. August 2009

Okay,
hat so funktioniert.

dmesg:

Code

[    6.038991] Linux video capture interface: v2.00
[    6.289946] saa7130/34: v4l2 driver version 0.2.15 loaded
[    6.290193] saa7134 0000:04:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    6.290207] saa7134[0]: found at 0000:04:00.0, rev: 1, irq: 11, latency: 64, mmio: 0xdfaffc00
[    6.290216] saa7134[0]: subsystem: 1462:8811, board: MSI TV@nywhere Satellite Pro [card=169,autodetected]
[    6.290281] saa7134[0]: board init: gpio is 100
[    6.290297] IRQ 11/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    6.486285] saa7134[0]: i2c eeprom 00: 62 14 11 88 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[    6.486299] saa7134[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[    6.486310] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 c3 ff ff ff ff
[    6.486321] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486332] saa7134[0]: i2c eeprom 40: ff 1c 00 c0 ff 1c 01 00 ff ff ff ff ff ff ff ff
[    6.486343] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486354] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486364] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486375] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486386] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486397] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486407] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486418] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486429] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486439] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.486450] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    6.567238] ir-kbd-i2c:  detected at i2c-1/1-0030/ir0 [saa7134[0]]
[    6.567807] saa7134[0]: registered device video0 [v4l2]
[    6.567841] saa7134[0]: registered device vbi0
[    6.928818] dvb_init() allocating 1 frontend
[    6.928825] saa7134[0]/dvb: MSI TV@nywhere Satellite Pro by roli
[    7.097050] DVB: registering new adapter (saa7134[0])
[    7.097058] DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)...
[    7.214069] saa7134 ALSA driver for DMA sound loaded
[    7.214088] IRQ 11/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    7.214124] saa7134[0]/alsa: saa7134[0] at 0xdfaffc00 irq 11 registered as card -1

Alles anzeigen

Leider finde ich mit der Karte keine Sender:

Code

vdr-gentoo ~ # dvbscan -v /usr/share/dvb/dvb-s/Astra-19.2E 
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

Alles anzeigen

Hab hier moch einen anderen PC mit 2 Pinnacle PCTV Sat, und die finden Sender, liegt also nicht an der Antennendose. Baue ich die MSI aber in den Rechner ein, findet sie keinen Sender.

dsiggi

r_schnappi · 6. August 2009

hast du eine easyVDR distri ?
wenn ja teste mal ob der scan nach
- "/etc/init.d/Runvdr loaddvbdriver"
funktioniert.

kannst du mal ein lsmod posten?

dsiggi · 11. August 2009

Zitat

Original von roland_s
hast du eine easyVDR distri ?
wenn ja teste mal ob der scan nach
- "/etc/init.d/Runvdr loaddvbdriver"
funktioniert.

Ich benutze kein easyVDR. Die Distri ist Gentoo.

Zitat

Original von roland_s
kannst du mal ein lsmod posten?

Code

Module                  Size  Used by
snd_pcm_oss            31968  0 
snd_mixer_oss          12272  1 snd_pcm_oss
snd_seq_dummy           2356  0 
snd_seq_oss            24136  0 
snd_seq_midi_event      6000  1 snd_seq_oss
snd_seq                38924  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          6176  3 snd_seq_dummy,snd_seq_oss,snd_seq
saa7134_alsa            9992  0 
tda826x                 2808  1 
tda10086                8160  1 
saa7134_dvb            20868  0 
videobuf_dvb            6188  1 saa7134_dvb
dvb_core               75364  1 videobuf_dvb
ir_kbd_i2c              6760  0 
saa7134               139756  2 saa7134_alsa,saa7134_dvb
ir_common              47836  2 ir_kbd_i2c,saa7134
v4l2_common            15540  1 saa7134
videodev               31172  2 saa7134,v4l2_common
v4l1_compat            11444  1 videodev
videobuf_dma_sg        11028  3 saa7134_alsa,saa7134_dvb,saa7134
videobuf_core          16012  3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom               10624  1 saa7134
snd_intel8x0           25564  0 
snd_ac97_codec         91408  1 snd_intel8x0
ac97_bus                1440  1 snd_ac97_codec
snd_pcm                60840  4 snd_pcm_oss,saa7134_alsa,snd_intel8x0,snd_ac97_codec
snd_timer              16704  2 snd_seq,snd_pcm
snd                    47184  10 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc          7952  2 snd_intel8x0,snd_pcm
tg3                    89268  0 
libphy                 19592  1 tg3

Alles anzeigen

dsiggi

dsiggi · 15. August 2009

Keiner eine Idee?

r_schnappi · 15. August 2009

sorry für die späte Antwort war eine Wocke Kurzurlaub,
ich glaube zu wissen wo der Felhler liegt:

Da ich Zwei Karten (mit T Stück) in meinem System habe schaltet die erste Karte die richtige Spannung.

Ich muss im Repo nur suchen wie ich auf der MSI auch die richtige Spannung einstellen kann, so dass du auch mit nur einer Karte umschalten kannst. Wird aber ein bisschen dauern bin auch noch kein 'C' freak

lg

dsiggi · 15. August 2009

Also heißt das für mich, erst mal warten?

dsiggi

einstein212 · 13. September 2009

hi,

ich hab die selbe tv karte und mit dem patch weiter oben, wird sie wunderbar erkannt. leider hab ich auch dieses tuner problem, dass die karte beim sendersuchlauf tuner not found meldet und keine sender findet

habt ihr das Problem mitlerweile in den griff bekommen?

[GELÖST] MSI TV@nywhere Satellite Pro - treiber ?

Jetzt mitmachen!

Teilen

Benutzer online in diesem Thema